Solar Components- Piping
A seperable quick assembly pipe system for solar thermal systems
The solar pipe 2in2 ME is a flexible quick installation system to connect solar collectors to the pump station and to the storage cylinder. The pipe system is very easy to install, enabling pipes to be run without the need to use heat in confied spaces.
Two closed cell elastometric foam extrusions of high-temperature resistant EPDM are reliably protected against mechanical damages by a common outer cover. Flow and return pipes can easily be seperated without damaging the insulation. 2in2 ME is the way to reduce installation time whilst ensuring a leak-free installation.
Click here for cross-section of 2 in 2 ME piping
| 2 in 2 ME | DN 12 | DN 16 | DN 20 | DN 25 |
|---|---|---|---|---|
| Fittings | 1/2" | 3/4" | 1" | 5/4" |
| Max. Working pressure PN at 20°C (bar) | 21 | 16 | 10 | 10 |
| Sections recommended compared to plain pipe | 12x1 | 15x1 | 18x1 | 22x1 |
| Dimensions - Length | 5, 10, 15, 20, 25 m | 5, 10, 15, 20, 25 m | 5, 10, 15, 20, 25 m | 5, 10, 15, 20, 25 m |
| Dimensions - Width x Height | ca. 80x45mm | ca. 90x50mm | ca. 100x55mm | ca. 110x60mm |
Easy to split - Easy to handle
Easy to split without damaging the insulation and easy to handle- Coils up to 25m in octatainer 80 x 80 cm
Mounting Accessories Mounting Bracket / Basic Set of Fittings
- Flexible Stainless Steel Hose AISI 316L/SS 316 S11
- Insulation 14/17/19mm
- Maximal Medium Temperature +150°C (+175°C*)
- Heat Conductivity- λ(0°C) 0,038 W/(mK)
- Inflammable (DIN 4102-B2)
- (DIN EN ISO 12572) Moisture Resistance Factor- μ≥3,000
